þ
Make sure the
BANDIT
is firmly secured to wall or floor, to prevent a burglar with prior
knowledge from throwing the unit quickly through a window.
Use an optional available
BANDIT
wallmounting to install the unit against a wall:
There are two kinds of wallmounting: flat or swivel. Use the re-usable mounting help
“Handy boy” to install the unit, as this tool carries the unit and makes it possible that any
person can install the device easily by himself.
- For wallmounting against a solid brick wall, use plugs and screws supplied within
- For wallmounting against a double plaster wall, use special metal plaster-plugs
available in any hardware store.
- For wallmounting against a single layer plaster wall: install the unit only in an inner
corner and order in addition an optional plaster inner corner support plate. Don’t install
the unit with a normal wallmounting against these kind of walls to avoid the device
falling on the floor after a while, due to its weight.
p. 6 - Mounting
þ
For floor mounting, use
BANDIT
floor mounting. This floor mounting is screwed into the
floor or stuck to it with included double-sided adhesive tape. The device is installed at 2
In. (50 mm) off the floor to avoid possible damage due to cleaning tools or water.
Hidden mounting of the appliance
þ
For installation into a closet, order the device with option /L. This unit is supplied with 4
rubber supports (feet), a 2 In. extended ejection nozzle (a standard closet door has a
thickness of approximately 3/4 In). and a heat resistant black door rosette (ejection
nozzle passage). This way you can hide the device and at the outside only the rosette
will be visible. Make sure you provide a ventilation grid above and beneath to avoid too
much rising of the temperature in the closet due to
BANDIT
‘s
heat loss. With an ambient
temperature above 50°C
/
120°F, the unit will activate its technical output [Okout] and you
can expect damage on the internal lead battery.
F
BANDIT
240 PB
v.408
Do not use any other rosette than the
one supplied with the unit. The supplied
rosette is made of a special heat and
steam resistant material. Fix the rosette
by using the special nut delivered with
it.
Hole drilled through
cabinet door
(hole saw dia. 2 In.)
Ejection nozzle, available
in R/60 or R/0 (straith) version
4 rubber feet
max. 1” (24 mm)
Black finish
rosette
Rosette
assembly nut
M50 x s. 1.5
C
a
b
in
e
t
d
o
o
r
Cabinet schelf
