Panic:
This function reports to
th
BANDIT
at the unit has to immediately perform a fog expulsion.
The panic mode can be activated independently of guard mode, delay settings or
confirmation requests. Normally, this input function is used to connect a panic switch to it.
Properties of the "panic mode”:
4
The red LED "Alarm" on the front panel will be blinking, as long as the unit is switched
into panic mode.
4
The moment the "panic mode" is activated, there will be immediately a fog expulsion
(the fog ejection period can be set seperately). A running panic mode fog expulsion
can only be interrupted by switching off the panic mode itself.
4
When a fog expulsion is finished and/or interrupted and a new panic mode is activated,
a new panic fog expulsion period will start. See also page 19, under temperature
protection.
4
If an output is determined as “panic output”, this output will be active as long the panic
mode is activated.
4
The moment the panic mode is activated, the internal siren of the unit will sound. The
volume as well as the sounding period of this panic siren can be set:
-
;
speaker -
;
panic siren.
Activation of the panic input:
Depending on the software settings this input can start or interrupt the panic mode.
Silent panic:
If this ‘silent panic input’ is activated, the unit only reacts by activating the output which is
determined as ‘silent panic output’ during
R
3 or
R
60 seconds (mostly used for tele-
reporting).
Of course this event will be saved in the log.
F
Using the software additional options can be assigned to the panic input.
Possible options for a panic input:
R
Can switch Panic ON.
An active edge (pulse) switches the panic mode on ( or ) .
R
Can switch Panic OFF.
An active edge (pulse) switches the panic mode off.
(e.g. key switch).
- A panic switch whereby both options are clicked on for this input, has the
possibility to either start (1st pulse) or stop (2nd pulse) a panic mode.
- A panic switch whereby only the option ‘Can switch panic on’ is clicked on for this
input, can only start a panic mode.
- A panic switch whereby only the option ‘Can switch panic off’ is clicked on for this
input, can only interrupt a running panic mode
BANDIT
240
PB
v.
408
p. 14 - Inputs - Functions
