The PC-communication link is a tool every
BANDIT
-installer has to use to have a data connection
between
BANDIT
and a computer with a standard COM
port (RS-232 SubD connector). To perform the software
settings as well as to read-out the log of the 240PB, you’ll
need this “Communication link”. It has to be plugged-in,
on one side in the fog generator to be set and read-out,
and at the other side into the computer.
On the back frame of the unit, you’ll find a female mini-jack connector mounted and
sunk-in. This extra protected, special input, has as feature to be the serial read-in and
read-out communication channel to a PC/laptop.
Green Led: Link on/off
This Led is on, the moment there is
communication, until 10 seconds after the
last communication signal.
If this Led blinks, both batteries have to be
replaced (Sony CR2430 or compatible).
Yellow Led: RS-232 communication-Led.
Blinks simultaneously with the
communication signals coming from the
PC/laptop. Blinks only when the chosen
COM-port of the PC/laptop is right set.
-
7
BS-software -
;
option -
comport
;
4
4
4
4
Fits to every PC/laptop (standard RS-232
/SubD9 connector).
Is compatible with the “old” 220
BANDIT
-model.
Safe, disturbance free and galvanic separation
between fog generator and PC or laptop
(+2.000 Volt secured opto-coupled data split).
BS-software CD included in box or upgradeable
through: www. bandit.be
Sunk-in
mini-jack connector
Communication Link
Frontpannel Communication Link.
BANDIT
240 PB
v.408
p.21 Inputs - Communication Link
Lap op
t
BS- of
e
s twar
- Batteries included and
mounted ready to go.
- 2 spare batteries added
in the box.