B&G Hydra 2000, User Manual

Page: 24 / 147

Hydra 2000 User Manual
Part 2 - Operating Information
HB-0844-02
2- 8
Note
The NAV key may be configured to show waypoint information in
either Great Circle or Rhumb modes. Refer to
section 2.5.3 for
further details.
2.1.9 Remote Button Operation
Each FFD may be provided with an optional Remote Button to
allow basic control of the associated FFD from a remote position.
The Remote Button has two Functions: Page Selection and Fast
Reset.
Page Selection is achieved by successive pressing of the
Remote Push-Button. When the button is pressed each of the
four user defined pages followed by the first page of the factory
set Speed/Depth, Navigate and Wind pages are displayed in a
fixed order.
When any one of the trip functions is selected at the associated
FFD, pressing and holding down the Remote Push-Button for two
seconds will change the display to show RESET flashing, or if
TIMER is selected START 10 flashing. Pressing the Remote
Button again will Reset that function, or in the case of TIMER start
the countdown. After a reset the display will revert to normal page
set-up automatically.
2.2 20/20 DISPLAY
The 20/20 is a fully programmable, single function display,
incorporating large digits, which may be installed virtually
anywhere in the yacht.
Control of the 20/20 Display may be achieved via any FFD or from
an optional Remote Button, see
Part 5 - Options.
2.3 SUPER HALCYON 3 AND HALCYON 2000 COMPASS
The Super Halcyon 3 and Halcyon 2000 Compasses are high
performance electronic transmitting compasses which interface
with your Hydra 2000 System. Heading and direction information
may be selected for display on any of the FFDs or on a Halcyon
Display. Additionally, analogue compass card displays may also
be added.
Software incorporated within the compass allows the unit to learn
the magnetic fields in the vessel that may cause deviation errors.