B&G Hydra 2000, User Manual

Page: 34 / 147

Hydra 2000 User Manual
Part 2 - Operating Information
HB-0844-02
2- 18
(4) When the 10 minute gun sounds, press Enter . The
display now shows the timer counting down from 10
minutes and the START 5 is flashing. If it is required to
correct the timer at the 5 minute gun then this is achieved
by pressing
Enter again at the 5 minute gun. The Timer
will count down to zero and then begin to count up giving
the time since the start.
(5) Press the Page Key to return to the normal display.
2.8.3 Reset Trip Log
(1) Display TRIP LOG in the upper display.
(2) Press Scroll Down once and the lower text now
shows CONTROL flashing.
(3) Press Enter and use the Scroll Down key to
display RESET flashing.
(4) Press the Enter key and the display now shows
RUN flashing.
(5) Press the Enter key again and the display shows the
trip log running.
(6) Press the Page key to resume normal operation.
Note
Every time you reset the TRIP LOG the AVERAGE SPEED
resets and begins its calculation again. The control facility for the
Dead Reckoned functions work in the same way; the bearing and
distance are linked, so that they are started simultaneously.
2.9 LIGHTING CONTROL
The level of illumination at system displays is controlled by the
Power/Lights Key. Use of this key normally controls all the Hydra
displays simultaneously. However, the level of illumination on a
single FFD can be controlled individually using the menu choice -
LIGHTING - LOCAL.