![background image](http://html1.mh-extra.com/html/bandelin/sonorex-technik-lg-series/sonorex-technik-lg-series_user-instructions_3823955019.webp)
23366b GB/2019-07
19 / 30
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
5
Maintenance and cleaning
To achieve an optimum lifespan for the ultrasonic generator, cleaning and maintenance
are to be conducted regularly.
CAUTION!
Disconnect the generator from the mains before each cleaning / maintenance.
Do not rinse or immerse the generator in water and do not expose them to splash
water.
No guarantee is given for damage caused by the use of unsuitable disinfection agents
or detergents.
5.1
Cleaning and care
Fan / cooling of the generator
• The generator must be cleaned regularly. Every 6 months, the dust should be
removed from the fan(s) on the rear. To do so, disconnect the generator from the
power supply and clean it with compressed air.
Housing, operating and power modules
• Do not use any abrasive cleaners, only commercial care products without abrasive
additives.
• Wipe down only the exterior of the housing and the modules with a damp cloth and
leave to dry or wipe dry.
5.2
Warehousing / storage
During extended periods without use, the generator should be stored in a cool, dry
place.
6
Maintenance and repair
6.1 Maintenance
The ultrasonic generator requires no maintenance.