![background image](http://html1.mh-extra.com/html/bandelin/sonorex-technik-lg-series/sonorex-technik-lg-series_user-instructions_3823955014.webp)
1* Open = HF
ON
2** "Process active" NO contact
(60 V; 0.5 A; 10 VA resistant)
3 GND - Generator's ground connection
4 Internal relay contacts
5*** "Error signal" opening contact - standard
(60 V; 0.5 A; 10 VA resistant)
* If
HF
ON
is switched to GND via a potential-free contact, the power
modules are blocked.
Caution! No voltage source may be placed on pin 1.
**
Only with an installed PRO 3 module.
***
Emitted in operation as soon as at least one error occurs on a
module.
Additional emission when the modules are blocked via HF
ON
or the
mains is switched off.
Plug: BANDELIN order No.: 3164
1
2
3
4
5
GND
HF
ON
Remote control
connection (exter-
nal)
14 / 30
23366b GB/2019-07
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
2.2.2
Remote control connection
Remote control and monitoring (error signal and process time)
For modi
fi
ed connection – see separate document.
2.2.3 RS 232 interface connection for SPS or PC
The generator can be connected to an SPS or a PC and controlled via the RS 232
interface.
Detailed information regarding the interfaces, protocol and connection assignment of
usable cables can be obtained from the manufacturer, upon request.
2.3 Start-up
Verify that the power switch is in the "off" position.
Connect the cables (HF cable and mains cable).