BANDELIN Sonorex Digitec DT 510 F, User Instructions

Page: 13 / 32

Contact fl uid
Sonication fl uid
Inset beaker
Contact fl uid
Laboratory fl asks
with sonication
solution
Beaker
holder
13 / 32 51326c GB/2017-06
1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com
3.2 Ultrasound signals
- not applicable -
3.3 Special functions
Degas ( – in the time scale area)
• The DEGAS function is switched on for degassing the system before sonication. To do so,
set the required time with the preset time button, then hold the Start/ Stop button for at least
2 seconds.
The system can be stopped prematurely by pressing the Start/Stop button.
During the degassing, the top green LED (
) also fl ashes until the time expires.
• Switching between ultrasound – degas: If the Start/ Stop button is kept depressed for a long
time when ultrasound is running, the ultrasound is fi rstly switched off and then after approx. 2
seconds the Degas function is reactivated.
Locking continuous operation ( – in the time scale area)
• To avoid accidentally turning on the continuous operation, the continuous operation can be
deactivated:
 Pull the mains plug out.
 Press the preset time button, hold it depressed and insert the mains plug at the same time.
The yellow LED "1 min" lights up in con fi rmation.
The function can be reactivated in the same way. The green LED continuous operation ( ) lights
up in con
fi rmation.
4 Use
Depending on the application, the samples are sonicated indirectly
in laboratory fl asks or other sample vessels, which are inserted in the
contact fl uid in the oscillating tank.
Direct sonication of objects in the bath fl uid in the ultrasonic baths DT
... F is not permitted.
The intended course is described step by step in the following sections.