![background image](http://html1.mh-extra.com/html/bandelin/sonorex-digitec-dt-510-f/sonorex-digitec-dt-510-f_user-instructions_3804553020.webp)
20 / 32
51326c GB/2017-06
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
6.4
Repairs and service
If errors or defects are ascertained as a result of the functional check, and if it is impossible to
rectify these, the ultrasonic bath may no longer be used. In such a case, please contact the
supplier or the manufacturer:
BANDELIN electronic GmbH & Co. KG
Heinrichstrasse
3-4
12207
Berlin
Repair
service:
E-mail:
Tel.:
+49-(0)-30 – 768 80 – 13
Fax:
+49-(0)-30 – 76 88 02 00 13
In the case of returns, the general terms and conditions for delivery and payment of
BANDELIN electronic GmbH & Co. KG shall apply.
In addition, the ultrasonic bath is to be cleaned and decontaminated (if necessary), see the
following Section.
6.4.1 Decontamination
certi
fi
cate
If the ultrasonic bath is sent back to the manufacturer for repairs (with accessories, as the case
may be), the form "Certi
fi
cate of Decontamination" is to be
fi
lled out and af
fi
xed to the packaging
on the outside, in a visible spot.
If this form has not been
fi
lled out, we reserve the right to refuse receipt of the package in order to
protect our employees.
The form can be downloaded from the Internet as a PDF
fi
le:
www.bandelin.com - Download ...
A sample copy can be found in the appendix.
6.4.2 Exchanging fuses
CAUTION!
Repair work may only be carried out by authorised, quali
fi
ed personnel or by the manufacturer.
The manufacturer assumes no liability for unauthorised interventions on the ultrasonic bath!
The mains plug must be pulled out before opening the ultrasonic bath!
There is a risk of electric shock from live parts in the ultrasonic bath!
Empty ultrasonic bath.
Turn over ultrasonic bath.
Loosen the screws around the casing.
Carefully remove the base plate.
If required, carefully separate the electrical plug connections between the base plate with
generator circuit board and the casing with oscillating tank.
Exchanging fuses:
- The fuses are located on the generator circuit board.
- After inspection, exchange only the defective fuses.
Assembly in reverse order.
Summary of Contents for Sonorex Digitec DT 510 F
Page 25: ......