![background image](http://html1.mh-extra.com/html/bandelin/sonorex-digitec-dt-510-f/sonorex-digitec-dt-510-f_user-instructions_3804553017.webp)
17 / 32
51326c GB/2017-06
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
4.4
Empty the oscillating tank.
Layers of contamination on the tank bottom reduce the ultrasonic output.
The oscillating tank must be emptied after a long period of use, see Section 4.5.2.
Switching off the ultrasonic bath (ON/OFF button).
Pull the mains plug out.
Do not place the ultrasonic bath in the sink.
Empty
the
oscillating tank by placing the ball valve handle in direction
of discharge to open outlet.
After emptying the oscillating tank, rinse it thoroughly. Then dry with a
soft cloth.
For further care instructions, see Section 5.
4.5
Further information
4.5.1
Degassing
Degassing the bath
fl
uid increases the ultrasound effect.
Freshly-
fi
lled
fl
uid or
fl
uid that has remained in the oscillating tank for a longer period of time
must be degassed prior to use. Gases released in the
fl
uid (e.g., oxygen) are reduced through
degassing and the ultrasound effect is thus signi
fi
cantly improved.
Switch on the ultrasound (without sonication objects, basket, etc.)
-
Ultrasonic baths with up to 10 litres bath volume: 10 min
-
Ultrasonic baths with more than 10 litres bath volume: 30 min
Time may need to be extended with acidic cleaning solutions.
The cavitation noise changes during degassing, loud degassing noises disappear at the end of the
degassing process, the ultrasonic bath appears to work more quietly.
A lower noise level, however, does not mean a reduction in ultrasonic power. It rather means the
end of the degassing process and an improvement in the ultrasound effect.
4.5.2
Disposal of sonication
fl
uids
The working solution is disposed of pursuant to the speci
fi
cations of the product lea
fl
et and the
label of the manufacturer of the preparations employed.
The aqueous preparations of DR H. STAMM GmbH are prepared pursuant to the regulations of
the Washing and Cleansing Agents Act, are biodegradable and may be added to sewerage as
working solutions. Strongly acidic and strongly alkaline
fl
uids are to be previously neutralised
pursuant to technical data sheet speci
fi
cations. The manufacturer speci
fi
cations for the
corresponding preparations are to be observed.
If the solution contains substances that are dangerous to water after use, e.g., oils, heavy
metal compounds, etc., it must be prepared once the limit values are exceeded (removal of
contaminants) or disposed of as special rubbish.
In every case, the statutory provisions and regulations of municipal wastewater plants are to be
adhered to. Information is provided by municipal wastewater plants as well as by environmental
agencies.
Summary of Contents for Sonorex Digitec DT 510 F
Page 25: ......