![background image](http://html1.mh-extra.com/html/bandelin/sonopuls/sonopuls_user-instructions_3767868032.webp)
searching
resonance frequency
calibration
searching
resonance frequency
scanning 20496 Hz
searching
resonance frequency
fine tuning 19945 Hz
32 / 42
51506-002 GB/2020-10
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
The frequency scan is completed once
fi
ne-tuning has been successful, and the display switches
back to stand-by mode.
Otherwise, an error message such as Error 012 appears again.
IMPORTANT:
Only allow repairs to be conducted by authorised skilled personnel!
Kindly inform us in writing of any malfunctions – use the enclosed questionnaire.
Important information
• Before each repair, turn o
ff
the device and disconnect the plug from the mains!
•
Defective parts may only be replaced with original parts.
The black housing of the ultrasonic transducer and the aluminium cylinder (ultrasonic oscillating
system) must not be twisted toward each other. The ultrasonic oscillating system and its electrical
connections would be damaged as a result.