green light:
Ultrasonic output
red light:
Error messages
fl
ashing red:
Warning messages
O
ff
:
Standby mode (PAUSE)
1
LCD Display
Display of the operating parameters and status information
2
“SET” key
Calling up the list of editable operating parameters, moving within
the menu (forward)
3
Rotary knob
Setting the operating parameters (right/left, without dead stop)
4
“START/STOP” key
Starting or stopping the ultrasonic output, ending functions,
exiting the menu
5 Control
LED
1
3
2
4
5
15 / 42
51506-002 GB/2020-10
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
2.3
Start-up
Check the positioning of the ultrasonic transducer in the holder.
Check
the
fi
rm positioning of the probe and, if needed, clean thoroughly before
fi
rst use.
Connect
the
ultrasonic generator to the mains ( earthed socket) and switch on.
Set the probe type (see Chapter 3.1.1)
Conduct function test as described in Chapter 6.2.1.
3
Operation
3.1
Operating controls
Operation is conducted from the operating and display panel on the front side of the ultrasonic
generator: