![background image](http://html1.mh-extra.com/html/bandelin/sonopuls/sonopuls_user-instructions_3767868017.webp)
AM 25% PAUSE
time
non-stop
pulse
on 01s off
01s
AM 25% PAUSE
time 01:30
00:00
pulse
on 01s off
01s
time 01:30
00:00
time
non-stop
AM 25% PAUSE
time 01:30
00:00
pulse
on 01s off
01s
time 01:30
00:00
SET
SET
AM 25% PAUSE
time 01:30
00:00
pulse
on 01s off
01s
AM 25% PAUSE
time 01:30
00:00
pulse
on 01s off
01s
1 to 59 seconds
1 to 99 minutes
01
01:30
SET
START
STOP
17 / 42
51506-002 GB/2020-10
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
The following operating parameters can be set:
•
Default values for the amplitude [AM]
•
Default values for the sonication time [time]
•
Default values for the pulsation of the ultrasound (turn-on and turn-o
ff
time) [pulse]
3.2.1
Sonication time
[time]
A default value of 99 minutes and 59 seconds (99:59) is the maximum sonication time that can
be set. If the default value is exceeded during ultrasonic operation, the sonication will stop.
The parameter “non-stop” is equivalent to unlimited continuous operation until ultrasonic operation
is ended by pressing the “START/STOP” key.
a) Set continuous operation [non-stop]
b) Setting the sonication time
If a value of 59 seconds is exceeded when setting the time, or if a shortfall occurs when setting
back the time, the values for the set minutes will change accordingly.
proceed to next set value or operating parameter
back to stand-by mode