O
PERATING
I
NSTRUCTIONS
Turbidity measuring
TURBICUBE
BAMO IER GmbH
Pirnaer Straße 24
68309 Mannheim
Tel. +49 (0)621 84224-0
Fax: +49 (0)621 84224-90
. www.bamo.de
SU3332a.doc 01/13
2
Technical Data:
Measuring signal
4 ... 20 mA, for connection to the BAMOPHOX TUR measuring amplifier
Observe:
If a different measuring amplifier is used, an external 10 to 30 V DC voltage source is required.
The measuring signal output is a current sink (see wiring diagram at the end of these instructions).
Auxiliary supply power
24V DC
rated
(10 ... 30V DC)
Connected load
0.5 W
Remark: if the measuring circuit is also connected to the auxiliary power supply of
the load will increase to additional 24 VDC x 20mA = 0,48W
Terminal housing:
PBT, IP 65
Ambient temperature
+5 ... +45° C
Medium temperature
PVC-type:
+5 ... + 60° C
PP-Type:
+5 ... + 80° C
Max. allowable operating pressure
6 bar max. 20°C / 1 bar max. 60°C
Measuring range
Version 20:
0,01 … 20 FNU
Version 1000:
0,1 … 1000 FNU
(5 selectable resolutions)
FNU - “Formazine Nephelometric Units“
Measuring accuracy
±5 % of actual measuring value,
±1 % of upper limit of effective range
Colour- / Fouling compensation:
only for TURBICUBe 20 available
Control elements
6-fold DIP switch , calibration potentiometer
Indicators
Status LED (green)
CE Mark:
In accordance with low-voltage directive RL 2006/95/EC and EMC directive 2004/108/EC
