Bambi MAX BBXHL4000 Service Manual Download Page 2

Page: 2 / 91

BAMBI MAX BUCKET SERVICE MANUAL

Models HL4000-HL9800

Version: 2023A

Part Number: 017008

Maintenance Level: Organizational (O)

PLEASE READ BEFORE USING.

This manual is applicable to the following models:

BBXHL4000 (# 007912)
BBXHL5000 (# 007914)
BBXHL7600 (# 007916)
BBXHL9800 (# 007918)

PATENTS

AU2012201273

CA2770005
US9265977

Physical copies of this manual (#011750) are available from SEI.

This manual is available on the SEI website.

This manual is based on information that was available at the time it was printed and may not

be applicable to products received before the issue date and customized items.

SEI INDUSTRIES LTD.

7400 Wilson Avenue

Delta, B.C. Canada

V4G 1H3

Phone: (604) 946-3131

Fax: (604) 940-9566

E-Mail: [email protected]

Website: www.bambibucket.com

Summary of Contents for MAX BBXHL4000




























































































Search results

Summary of Contents for MAX BBXHL4000

Reviews:

Related manuals for MAX BBXHL4000

Brands by name

Popular brands

Bambi MAX BBXHL4000, Service Manual

Search results

Summary of Contents for MAX BBXHL4000

Reviews:

Related manuals for MAX BBXHL4000

Brands by name

Popular brands