baltur TBG 45 PN, Manual Instructions For Use

Page: 8 / 98

E
N
G
L
I
S
H
6 / 18
0006081367_201011
2
0
mbar
0002922650
100
kW
TBG 45P
10
200 300 400 500 600 700
4
6
8
10
3
3
m /h(Metano)
m /h(G.P.L.)
n
n
20 30 40 50 60 70
2 4 6 8 10 12 14 16 18 20 22 24 26 28
TBG 45ME
TBG 60P
TBG 60PN
TBG 45PN
TBG 60ME
TBG 45P-V TBG 60P-V
WORKING FIELD TBG 45PN / 60PN
The working fields are obtained from test boilers corresponding to the standard EN267 and are indicatively for the combination burner-
boiler. For correct working of the burner the size of the combustion chamber must correspond to current regulations; if not the manufac -
turers must be consulted.
POWER SUPPLY LINE
The gas supply scheme is shown in the diagram below. The gas train is certified in accordance with regulations EN 676 and is supplied
separately from the burner. A manual shut off valve and anti-vibration joint must be installed upstream of the gas valve, as shown in the
diagram.
Legend
1) Manual shut off valve
2) Anti-vibration joint
3) Gas filter
4) Minimum gas pressure switch
5) Safety valve
6) Pressure regulator
7) Valves seal control device (obligatory for burner with maxi
-
mum nominal thermal out-put over 1200 kW)
GENERAL GAS BURNER SYSTEM
8) Two-stage working valve
9) Control servomotor
10) Air adjustment gate
11) Air pressure switch
12) Combustion head
Gas train
supplied by the manufacturer
The job of the installer
N° 0002910950-PN