baltur TBG 45 ME, User Instruction Manual

Page: 18 / 136

16 / 22
0006081533_201403
TBG 60 ME TBG 45 ME
ENGLISH
REDUCERS ASSEMBLY INSTRUCTIONS
FOR LPG
In the event of functioning with LPG fuel connect the appropriate
reducers supplied with the burner. For the assembly of the reducers
follow the instructions below.
1) After having loosened the holding screws 1 remove the
reducers A (N.2) from their respective housings.
2) Connect the two reducers B with holes turned
towards the external part of the mixer.
3) Position the holes (C) at the same level of the disk flame
(D) as shown in the figure; fixing in the proper way the new
reducers by turning the respective screws.
1) After having loosened the holding screws 1 remove the
reducers A (N.2) from their respective housings.
2) Ensure that the reducers output hole is found at the same
level as the disk flame B as shown in the figure; fixing the
new reducers properly by turning the respective screws.
!
In some particular applications, in the event that there
are pulsations in the flame during the functioning of
the burner with natural gas, it is advisable to use the
intended reducers for LPG fuel.