baltur 17350010, Installation, Use And Maintenance Instruction Manual

Page: 48 / 72

ENGLISH
12 / 34
0006160161_201711
TECHNICAL FUNCTIONAL CHARACTERISTICS
• Gas burner compliant with European Standards EN 676 and
European Directives 006/42/EC; 2006/95/EC; 97/23/EC; 2004/108/
EC.
• Operation with two progressive power stages.
• Ability to operate with output modulation by means of automatic
regulator mounted on the control panel (to be ordered separately
with the modulation kit).
• Modulation ratio 1:4.
• High fan output, low electrical input, low noise.
• Combustion head with partial recirculation of combusted gases
with reduced NOX emissions.
• Easy maintenance as the mixing unit can be removed without
having to disassemble the burner from the boiler.
• Air minimum and maximum flow rate regulation by means of electric
stepper servomotor with pause closure of shutter to prevent any
heat dispersion to flue.
• Gas adjustment using the butterfly valve controlled by the
electronically controlled step by step servomotor;
• Valve seal control according to European Standard EN676;
• Equipped with 4 and 7 pole connectors, 1 flange and 1 insulating
seal for fixing to the boiler;
• Gas train outlet from the top or from the bottom;
DESIGN CHARACTERISTICS
Burners are composed by:
• Comburent air intake with throttle gate for the regulation of the air
flow rate.
• Sliding generator connection flange to adapt the head protrusion to
the various types of heat generators.
• Air pressure switch to ensure the comburent air presence.
• Main gas train in EC version consisting of an operating and safety
valve with electro-magnetic operation, minimum pressure switch,
pressure regulator and gas filter.
• Flame detection by means of ionisation electrode.
• Automatic burner command and control equipment according to
European standard EN298.
• Display showing the operating sequence and error code in the
event of a lockout.
• Connection to gas train with fail safe connectors
• 7-pole plug for electric power supply and thermostat connection of
the burner
• 4-pole plug for second operation stage or electronic power
regulator control
• Suitable for microammeter connection to the ionisation cable
• Electrical system with protection rating