2.2. Verwendungszweck
• Prüfen Sie die Polarität und die Anschlüsse.
• Das Gehäuse der 3D Stereokamera muss geerdet sein.
Warnung:
• Die Sicherheitsrichtlinien der 3D Stereokamera und der zugehörigen Geräte müssen immer einge-
halten werden.
• Die 3D Stereokamera fällt nicht in den Geltungsbereich der Maschinen- oder Medizinrichtlinien.
Risikobewertung und endgültige Anwendung: Die 3D Stereokamera darf mit einem Roboter verwen-
det werden. Roboter, 3D Stereokamera und alle anderen Geräte, die in der endgültigen Anwendung
verwendet werden, müssen mit einer Risikobeurteilung bewertet werden. Es ist die Pflicht des Syste-
mintegrators, die Einhaltung aller lokalen Sicherheitsmaßnahmen und Vorschriften zu gewährleisten.
Je nach Anwendung kann es Risiken geben, die zusätzliche Schutz-/Sicherheitsmaßnahmen erfor-
dern.
2.2 Verwendungszweck
Die 3D Stereokamera ist für die Verwendung in Kombination mit dem SGM®Producer bestimmt. Die 3D
Stereokamera ist für die Installation an einer automatisierten Maschine, einer mobilen Plattform oder einer
stationären Anlage vorgesehen. Sie kann auch zur Datenerfassung in anderen Anwendungen eingesetzt
werden.
Warnung:
Die 3D Stereokamera ist
NICHT
für sicherheitskritische Anwendungen vorgesehen.
Warnung:
Die 3D Stereokamera darf
NICHT
in dynamischen Umgebungen genutzt werden und darf
NICHT
am Endeffektor eines Roboters befestigt werden.
Die 3D Stereokamera darf nur im Rahmen ihrer technischen Spezifikation verwendet werden. Jede andere
Verwendung des Produkts gilt als nicht bestimmungsgemäß. MATRIX VISION haftet nicht für Schäden, die
aus nicht bestimmungsgemäßer Verwendung resultieren.
Warnung:
Die lokalen und/oder nationalen Gesetze, Vorschriften und Richtlinien zu Automationssicher-
heit und allgemeiner Maschinensicherheit sind stets einzuhalten.
MATRIX VISION GmbH
Handbuch: BVS 3D-RV1
10
Rev: 1.0
Status: 07.11.2022