www.balluff.com
english
3
BLA 50A-002-S4
Balluff Light Array
1
1.1 About this guide
1.5 Laser class
2
2.2 Intended use
2.3 Safety notes
2.4 Explanation of the warnings
2.5 Disposal 5
3
3.1 Installation 6
3.4 Alignment 7
3.4.1 Aligning without assistance
3.4.2 Aligning using electronic assist
3.4.3 Signal normalizing
4
4.1 Introduction 8
4.2 Menu structure
4.3 Configuring the analog outputs
4.3.1 One edge
4.3.2 Diameter and position (two edges)
4.3.3 Multiple objects
4.4 Configuring object detection or counting (digital outputs)
4.4.1 Detection modes
4.4.2 Object mode
4.4.3 Teach objects
4.4.4 Count modes
4.5 Size restriction of measuring field (Blanking)
4.6 Display options
4.7 Resetting to factory defaults
5
5.2 Signal normalizing and autoblanking
5.3 Info 14
5.4 Locking settings
6
6.1 IO-Link data
6.2 Process data
6.3 Checksum / status of process data
6.4 Parameter data
6.4.1 Identification data
6.4.2 Access lock (Index 0x0C) 16
6.4.3 System command (Index 0x02) 17
6.4.4 Parameter data
7
7.1 Dimensions
19
7.2 Mechanical data 19
7.3 Electrical data (typical) 19
20
7.5 Ambient conditions
20
7.6 Maintenance 20
20
BLA 50A-002-S4
