17
17
english
BIS M-81_
Configuration
Configuration 2
Language
561
Menu item 6 takes you to Configuration Menu 2:
Here you can select the menu language.
Menu item 2 returns you to Main Menu 1 following a prompt
asking whether you want to save the configuration.
Configuring the serial RS 232 port for communicating with a PC or laptop:
The following parameters can be set:
– Baud rate:
9600, 19200, 38400 or 57600 Baud
– Stop bits:
1 or 2
– Data bits:
8 (cannot be changed)
– Parity:
E (even), O (odd) or N (none)
– BCC / CR:
B (BCC), C (CR)
The desired values must be entered and confirmed by pressing
«
. Copied values can
be confirmed directly by pressing
«
.
Configure port
54
M-81_854610_E_0703.p65
18
english
18
Function Description BIS M-81_
Processing data carriers
Read data carrier
1
Selecting "READ" in Main Menu 1 takes you to the menu for reading the data carrier. You
are asked to enter the start address and – depending on which input mode is configured –
the end address or the number of bytes:
or
The data for the last entry made or for the data specified in the configuration for start ad-
dress and end address with number of bytes are displayed as the default values. Press
¢
and
£
to toggle between the two entry fields. Press
«
to accept the data.
If you press the
«
key to confirm the entered data in the
"up to byte no.:" or "number of bytes:" field, the read pro-
cedure will be started. As long as there is no data carrier in
the read range, a bar will flash in the middle of the 2nd line.
As soon as a data carrier is recognized, the flashing will
stop and the data will be read from the data carrier.
The data carrier must not be removed from the active zone of the read/write head while data are
being read from the data carrier!
To cancel the read, press the
«
key.
READ data carrier
--------------------
at byte no. :
to byte no. :
Entry menu 1 for reading a data
carrier
