Balluff BAM MD-VS-001-0002, Operation Manual

Page: 279 / 314

279
www.balluff.com
5
Appendix A: Technical Specifications
Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
5.3 LED and Beeper
Indications The reader’s beeper sounds and its LED illuminates to indicate various functions or errors on the
reader. An optional “Green Spot” also performs useful functions. The tables below list these indi-
cations. One exception to the behaviors listed in the tables is that the reader’s functions are pro-
grammable, and may or may not be turned on. For example, certain indications such as the
power-up beep can be disabled using programming barcode labels.
LED and Beeper
Indications
Programming
Mode
Indications
INDICATION DESCRIPTION LED BEEPER
Power-up Beep
The reader is in the process
of powering-up.
Reader beeps four
times at highest fre-
quency and volume
upon power-up.
Good Read Beep
A label has been successfully
readed by the reader.
LED behavior
for this indica-
tion is configu-
rable via the
feature “
Good
Read: When to
Indicate
”
The reader will beep
once at current fre-
quency, volume,
tonal setting and
duration upon a suc-
cessful label scan.
Green Spot
a
flashes momen-
tarily
a. Except when in sleep mode or when a Good Read LED Duration other than 00 is selected
Upon successful read of a
label, the software turns the
green spot on for the time
specified by the configured
value.
N/A N/A
Image Capture When ready to capture image
Blue light
flashes 2 times
when updating N/A
Programming Mode - The following indications ONLY occur when the reader is in Program-
ming Mode.
INDICATION DESCRIPTION LED BEEPER
Label Program-
ming Mode Entry A valid programming label
has been readed.
LED blinks con-
tinuously
Reader sounds four
low frequency
beeps.
Label Program-
ming Mode
Rejection of Label
A label has been rejected. N/A
Reader sounds
three times at lowest
frequency & current
volume.
Label Program-
ming Mode
Acceptance of
Partial Label
In cases where multiple labels
must be readed to program
one feature, this indication
acknowledges each portion
as it is successfully readed.
N/A
Reader sounds one
short beep at high-
est frequency & cur-
rent volume.
Label Program-
ming Mode
Acceptance of
Programming
Configuration option(s) have
been successfully pro-
grammed via labels and the
reader has exited Program-
ming Mode.
N/A
Reader sounds one
high frequency beep
and 4 low frequency
beeps followed by
reset beeps.
Label Program-
ming Mode Can-
cel Item Entry
Cancel label has been
readed.
N/A
Reader sounds two
times at low fre-
quency and current
volume.