Baldwin Boxall BVRD series, Installation Instructions Manual

Page: 14 / 26

BVRD Series Microphones
Installation Instructions
8
BVRD Series Microphones issue 5
3.2 BVRD USB C
ONFIG
S
OFTWARE
Install the “BVRD USB Configuration Software”.
The software includes comprehensive on-line help that explains
how to correctly configure the unit to suit the installation.
Figure 3.2 — Typical Page from BVRD USB Configuration Software
3.3 L
OADING
“D
EFAULT
” V
ALUES
To load the default configuration settings the following procedure
should be used:
1. Remove the RJ45 lead,
2. Turn the keyswitch 45° to Emergency position,
3. Press and hold the “Speak” button,
4. Re-connect the RJ45 lead while holding the “Speak” button,
5. Unit will show a confirmation to load Factory Default
settings.
Default configuration values will then be loaded into the
unit.
The default configuration settings are shown in Table 3.1.