9
DIAGNOSTIC LEDS
The drive contains two diagnostic LEDs to display the drive’s operational status. See Figure 5,
on page 14, for the location of the “PWR” and “ST” LEDs.
9.1 Power On (PWR):
The “PWR” LED will illuminate green when the AC line is applied to
the drive.
9.2 Status LED (ST):
The “ST” LED is a tricolor LED which provides indication of a fault or
abnormal condition. The information provided can be used to diagnose an installation
problem such as incorrect input voltage , overload condition, and drive output miswiring.
It also provides a signal which informs the user that all drive and microcontroller operating
parameters are normal. Table 10, on page 27 summarizes the “ST” LED functions.
Note:
The drive is factory set for Automatic Start. For Manual Start/Reset,
see Section 5.6, on pages 18 and 19.
28
Summary of Contents for SERIES 5
Page 29: ...NOTES 29...
Page 30: ...NOTES 30...