Baldan DCF-CO, Instruction Manual

Page: 58 / 122

Instruction Manual
DCF-CO 58
The information on this page has been taken from the cardan
manufacturer’s catalog.
NOTE
The cardan is limited in its maximum angle of articulation. This angle, with the cardan in
operation, can reach a maximum of 35° for a short period of time. In continuous work, it should
not exceed 15°.
Sagety protection (1) is a fundamentally important component for the user’s
personal safety and for the cardan shaft’s lifespan.
ƒ
Adjustments
• Cardan recommendations
35º
15º 15º
35º
IN A SHORT PERIOD OF TIME IN CONTINUOUS WORK
Do not work with the DCF-CO if the cardan is not
with its guard (1). Ignoring this warning may case
severe accidents or cardan damages.
IMPORTANT
1
Never engage to TDP when the joint is at an angle greater than 15°.
When maneuvering with PTO off, never exceed the pivot angle of 35 degrees, this may occur
in transportation routes or maneuvers in warehouses with the coupled cardan.
ATTENTION