Baldan DCF-CO, Instruction Manual

Page: 104 / 122

Instruction Manual
DCF-CO 104
ƒ
Maintenance
• General cleaning
08 - Remove the protective caps, separate “male” from “female”, wash and remove crusts,
dry and lubricate sliding parts with grease and reassemble.
09 - After all maintenance precautions, store your DCF-CO in a plain surface, at a covered
and dry location, away from animals and children.
10 - We recommend washing the
DCF-CO
with water only on the beginning of works.
Do not use abrasives or chemical products to wash the DCF-CO,
as it may damage its painting and adhesives.
ATTENTION
• Distributor Preservation - Part I
01 - Wash and clean all distributor components during and at the end of the work season.
02 - Use neutral products to clean the distributor following the safety and handling guidelines
provided by the manufacturer.
03 - Always carry out maintenance during the periods indicated in this manual.
To extend the useful life and appearance of the DCF-CO, follow the instructions bellow:
• Distributor Preservation - Part II
01 - Be careful when performing high-pressure washing; do not direct the water jet to connectors
and electrical components. Isolate all electrical components;
02 - Use only NEUTRAL detergent and water (pH equal to 7);
03 - Apply the product, strictly following the manufacturer’s instructions, on a wet surface and in
the correct sequence, respecting the application and washing times;
The practices and care below make a difference for the conservation of the DCF-CO if adopted
by the owner or operator .