Page 11
VL Panel for VS/GS5xxDZ Series
ML Panel for GL Series
Initial Start-up
When your spa is first actuated, it will go into Priming mode (after displaying some
configuration information). The Priming mode will last for less than 5 minutes and then
the spa will begin to heat the spa and maintain the water temperature in the Standard
mode. You can exit Priming mode early by pressing "Temp" or "Warm" or "Cool"
button.
Temp Set
(80°F - 104°F / 26°C - 40°C)
The start-up temperature is set at 100.4°F/38°C. The last measured water
temperature is constantly displayed on the LCD.
NOTE: The water temperature displayed is current only when the pump has been
running for at least 2 minutes.
Standard Mode
maintains set temperature. "
St
" or "
Std
" or "
STANDARD
" will be
displayed momentarily when you switch into Standard Mode.
Economy Mode
heats the spa to the set temperature only during filter cycles. "
Ec
" or
"
Ecn
" or "
ECONOMY
" will display when water temperature is not current, and will
alternate with water temperature when the pump is running.
