Page 17
spa does not reset, shut off
the power to the spa and call
your
dealer
or
service
organization.
OH
OHS
SPA
TEMP
LMT
"Overheat" - The spa has shut
down. One of the sensors has
detected that the spa water is
110°F/43.5°C.
DO
NOT
ENTER
THE
WATER. Remove the spa
cover and allow water to cool.
At 107°F/41.7°C, the spa
should automatically reset. If
spa does not reset, shut off
the power to the spa and call
your
dealer
or
service
organization.
SA
SnA
SENSOR
A
SERVICE
RQD
Spa is shut down. The sensor
that is plugged into the
Sensor "A" jack is not
working.
If the problem persists,
contact your dealer or service
organization. (May appear
temporarily in an overheat
condition.)
Sb
Snb
SENSOR
B
SERVICE
RQD
Spa is shut down. The sensor
that is plugged into the
Sensor "B" jack is not
working.
If the problem persists,
contact your dealer or service
organization. (May appear
temporarily in an overheat
condition.)
Sn
SnS
SENSOR
SYNC
Sensors are out of balance. If
alternating
with
spa
temperature, it may just be a
temporary
condition.
If
flashing by itself, spa is shut
down.
If the problem persists,
contact your dealer or service
organization.
HL
HFL
HTR
FLOW
LOW
A
significant
difference
between temperature sensors
has been detected. This could
indicate a flow problem.
If the water level is normal,
make sure all pumps have
been primed. If problem
persists, contact your dealer
or service organization.
LF
LF
LOW
FLOW
Persistent low flow problems.
(Displays
on
the
fifth
occurrence of HL message
within 24 hours.) Heater is
shut down, but other spa
functions continue to run
Follow action required for HL
message. Heating capability
of the spa will not reset
automatically; you may press
any button to reset.
