Flashing characters
Progressive message
Press TEMP button for “action”
Press LIGHT button to “select”
Pause / back to Main Screen / setting not saved
Pause / back to Main Screen / setting saved
Menu Items may or may not appear
SEQUENCE KEY
( View page 2 for full description )
Follow this sequence to invert the display.
This display is inverted (A), and this display is
not inverted (B).
SEQUENCE
Press the TEMP button. The Set
Temperature will appear and flash.
While the Set Temperature is
flashing, press LIGHT until
FLIP appears.
Press TEMP to flip the display.
Press LIGHT to save your setting.
The Main Screen will
appear automatically.
If you do not press LIGHT, your setting
will not be saved, and the Main Screen
will appear momentarily.
Follow the same sequence to restore
the default display orientation (B).
Main Screen
°°°
TP200
USER GUIDE
42369 Rev A2
14
13
Balboa Water Group | Your Single Source Solution
HOLD MODE
HOLD MODE
Follow this sequence activate Hold Mode.
Hold Mode is used to disable the pumps
during service functions like cleaning or
replacing the filter. This mode will last
for 1 hour unless it is exited manually by
pressing the LIGHT button.
INVERT DISPLAY
A
B
Press the TEMP button. The
Set Temperature will appear
and flash.
Press the LIGHT button until
HOLD appears.
Press the TEMP button to
put the pumps on Hold for
one hour.
This message indicates that
the pumps are on Hold for one
hour, and this message will
appear during the whole hour.
You can exit Hold Mode at any
time by pressing the LIGHT
button.
This indicates that the Hold
Mode is done. After a moment
the Main Screen will appear
automatically.
Main Screen
SEQUENCE
