1
© 2010 Bakker Hydraulic Products B.V.
Nijverheidsweg 6
6662 NG Elst (Gld) Holland
Tel : + 31 481 374757 Fax : + 31 481 375280
Site :
E-mail :
Introduction
The RotaQ is
a tool exchanger for truck-mounted cranes and hoisting loads up
to
55 kN.
You can operate the RotaQ from the control panel of the mounted crane on your
truck. To exchange and operate your crane tools you no longer have to leave this
position.
We strongly urge you to read this manual and follow the operating instructions.
It is also vital that you ensure that all safety regulations with respect to working
with truck-mounted cranes have been met during work, inspections,
maintenance, etc. We specifically refer to the safety regulations in this manual
and all relevant safety regulations (statutory safety regulations, safety regulations
for the attachments and safety regulations provided with the truck-mounted
crane and truck, and all other safety regulations that apply to the work space
during work, inspections, maintenance, etc. on the installation).
It is not permitted to adjust the RotaQ in any way on pain of lapsing guarantee
and CE certification.
The RotaQ has a CE certification and meets all relevant CE safety requirements.
It is nevertheless not permitted to put the RotaQ into commission before the
machine the RotaQ will be part of as a whole has been found and declared to be
in full compliance with the provisions of the
Machinery Directive
, 2006/42/EC
