10
© 2010 Bakker Hydraulic Products B.V.
Nijverheidsweg 6
6662 NG Elst (Gld) Holland
Tel : + 31 481 374757 Fax : + 31 481 375280
Site :
E-mail :
5.
Safety
•
The RotaQ cannot be used for hoisting people or attachments designed to hoist people. This
requires special adjustments from the manufacturer!
•
Only qualified persons can operate the truck-mounted crane with the RotaQ.
•
When coupling and decoupling the attachments and subsequently using the truck-mounted
crane, the following applies:
o
Ensure, by visual inspection, that the red signal pin is fully open after decoupling, or
fully flush after coupling. Only in these states will the RotaQ on the truck-mounted
crane be unlocked and locked respectively.
o
The moment you pressed the control button for the RotaQ, you can see a red light
immediately above the control button and an alarm will sound. The attachment can now
no longer be lifted or moved. This light signal and the alarm will stop the moment you
stopped the decoupling or coupling by pressing this activation switch again.
o
Mechanically test if the decoupling or coupling is successful by first moving the crane
arm gently.
•
Prevent hazardous situations. Keep out of reach of moving parts.
•
Make sure no people are within the reach of the crane when it is operational.
•
Turn of the truck's engine before performing inspections or
maintenance.
•
Regularly check (once a month) the condition of the exchange system
including the attachments and load-bearing parts.
6. Warranty
In accordance with our agreement, our general terms and conditions apply to all our
offers and deliveries.
Unless explicitly stated otherwise in our agreement, the following service point is
used:
Bakker Hydraulic Products B.V
.
Nijverheidsweg 6, 6662 NG ELST, The Netherlands
+31(0)481-374757
+31(0)481-375280
@
