13
© 2010 Bakker Hydraulic Products B.V.
Nijverheidsweg 6
6662 NG Elst (Gld) Holland
Tel : + 31 481 374757 Fax : + 31 481 375280
Site :
E-mail :
the valve.
non-sharp pin (be careful not
to danmage the seal)
your thumb.
9. Once the seal is in place (flush
with the outside of the valve)
the sleeve can be placed over
the valve.
Tighten the bush again with
pipe wrench No. 27. Tightening
torque : 80-100 Nm.
10. View of the tightened bush.
•
In case of problems, please contact the supplier.
•
Prevent contamination of the hydraulic coupling points in bottom
plates and the RotaQ when they are disconnected.
•
Inspect and check the hydraulic coupling points for contamination and clean them
regularly.
•
Check all bolt connections after 20 working hours and retighten if necessary.
Without lubrication
Tightening torque
M 6 12.9
17 Nm
M 8 8.8
19 Nm
M 8 12.9
40 Nm
M 10 12.9
85 Nm
M 12 12.9
145 Nm
