Page 30 of 59
Condensate Plate
If there is excess humidity in the system, or you want to run a ‘dry’ atmosphere then the
condensate plate is able to reduce the humidity level. This is achieved by cooling the
plate to below the dew point to allow for the humidity to condense on the plate.
Figure 32: Condensate Plate
As this forms droplets these are then collected into a small reservoir in the end panel
that will then drain off when it fills to a pipe at the rear of the workstation.
Figure 33: Condensate Output and Tray
A water tray is provided to collect the water for disposal or it can be piped to a drain if
located close by.
