Page 21 of 59
Workstation Entry
Once the vacuum has been achieved, the Glove Port Handle can now be rotated in either
direction to unlock the Glove Port Cap.
As there is a strong vacuum within the Ezee-Sleeve, removal of the Cap can require a
reasonable amount of force. This can be made easier by pushing the uppermost part of
the Handle to first break the vacuum at the upper edge of the Cap seal.
Figure 17: Glove port cap
The Glove port Cap can now be stored inside the workstation using the locator feature on
the rear of the Cap. These slot into the storage brackets mounted within the workstation.
Figure 18: Glove port cap stowage and locator
