Baker Hughes Panametrics PanaFlow Z3, User Manual

Page: 43 / 118

PanaFlow Z3 User’s Manual 31
Chapter 3. Programming
Figure 25: Setting up Frequency Output
3.5.3.3 Understanding the Error Handling Option
The Table 9 shows the response to each of the Frequency Output Error Handling options. For a multi-path meter, the
[Path Error Handling] set to ON (see Figure 36) changes the Output response. See Table 10 for Analog Output
response with Path Error Handling set to ON.
Note:
Table 10 assumes Composite Actual Volumetric is chosen as Measurement for Frequency Output and the
Path configuration is 3 paths.
Table 9: Frequency Output Error Handling options
Option Output Response
Low Forces Output to 0Hz on error
High Forces Output to 10000Hz on error
Hold Holds the last “good” Hz reading
Other Enables the user to enter a value between 0Hz and 12000Hz to be output
during an error
Digital Output (Std)
Off
Alarm
Measurement Type
Channel 1
Channel 2
Channel 3
Composite
Measurement Type/Comp
Pulse
Frequency
Base Value
Full Value
Full Frequency
Measurement Type Velocity
Volumetric (Act)
Soundspeed
Volumetric (Std)
Avg Vol Flow Rate
Mass Flow
Mass Flow
Base Value
UNIT: m/s
0.000
Test Frequency
Base Value
Base Value
0.000 m/s
Frequency
Full Value
Measurement Type
Full Frequency
Frequency
Test Frequency
Full Value
Error Handling
Full Frequency
Test Frequency
0 Hz
Error Handling Value
Frequency
Full Value
Full Frequency
Error Handling
Low
High
Hold
Other
Measurement Type/Comp
Measurement Type/CH #1
Reynolds#
SNR Up
Gain
Std Deviation Gain
Measurement Type/CH #1
SNR Dn
Measurement Type
Composite
Channel 1
Channel 2
Channel 3
Velocity
Volumetric (Act)
Mass Flow
Soundspeed
Test Frequency
0
UNIT: Hz
Test Frequency 12000 Hz
Value
UNIT: Hz
12000
Frequency
Base Value
Error Handling
Value
9
2
9
2
9
2
9
2
9
2
9
2
9
2
or
9
2
9
or
9
2
9
or
9
2
9
or
9
2
9
or
9
2
9
Input/Output
Digital Output (Std)
Analog Output (Std)
Option Comm (Slot 1)
Option I/O (Slot 2)
[ ] 2 9
[ ]
UNDO
MOVE
[ ]
[ ] SAVE
ALTER
[ ]
2 9
[ ]
UNDO
MOVE
[ ]
[ ]
SAVE
ALTER
[ ] 2 9
[ ]
UNDO
MOVE
[ ]
[ ]
SAVE
ALTER
Operator Access or Higher