Repeat the above process to enter any available
press curve
and
CS table
data points.
Note:
The CS table is required only if ppmw measurements
will be made. Consult Panametrics for the table values to
use for your application.
2.3.3 Locking and unlocking the keypad
To lock the keypad to prevent it from being used, enter the
user program as described on page 11.
Use the
down arrow
key to
select lock keypad on the
initial screen and press
enter
twice. The keypad is
now locked.
To unlock the keypad, just re-enter the user program as
described on page 11. No further programming steps
are required.
2.3.4 Locking and unlocking the menus
To lock the menus to prevent them from being changed,
enter the user program as described on page 26.
Use the
down arrow
key to
select lock menus on the
initial screen and press
enter
twice. The menus
are now locked.
To unlock the menus, just re-enter the user program as
described on page 11. No further programming steps are
required.
15
