Baker Hughes Masoneilan SVI II AP, Quick Start Manual

Page: 88 / 108

© 2018 Baker Hughes, a GE company, LLC. All rights reserved.
88 | = BHGE
ES-699 Rev AD
Page 12 of 13
9.2 Electronics Module
Make sure that:
The 4 O-rings are seated on the base of the electronics assembly and are not
damaged.
The four retaining screws are snug
9.3 I/P
Make sure that:
The wire is not damaged when feeding it through the housing.
A single O-ring is in place on the wire-sleeve and is not damaged.
The four retaining screws are snug.
Inserting the wire sleeve through the housing does not require force.
9.4 Relay
Make sure that:
The five O-rings are seated in the base of the relay and are not damaged
The three mounting screws are snug.
9.5 Pneumatic Cover
Make sure that:
The gasket is seated in the groove.
The retaining screws are snug.