Copyright 2022 Baker Hughes Company.
English–PTC Temperature Calibrators | 23
2. Tap the
icon to shutdown the calibrator.
3. The calibrator regulates the temperature to a safe value. The message “Please wait – device
is being brought to a safe temperature” is displayed.
4. When the safe temperature has been reached, the message “You can now switch off the
device” is displayed.
5. Switch off the calibrator via the mains switch.
6. Disconnect the calibrator from mains power if no further testing is required.
7. Unplug the power cord from the wall outlet.
8. Clean the calibrator after use, see Section
5. User Interface
5.1 Main Window
Figure
16: Main Window
Ref
Function
Description
1
Calibrator Setup
Tap the
icon to open the “Calibrator Setup” window. The
calibrator settings can be change. See Section
2
Measurement Logs
Tap the
icon to open the “Select Log Data” window. Saved
measurement logs can be selected and viewed. See Section
9.
3
Remote Control
Enables Internet communication.
4
Test Task
Tap this area to open the “Select Test Task” window. Saved test tasks
can be selected. New test tasks can also be created. See Section
5
Shutdown
Tap the
icon to shutdown the calibrator. See Section
6
Display Range
This window shows the reference temperature, set point temperature
and additional information related to the selected test task. See
