VISIT US AT BAKCOU.COM |
15
CHECK THE BRAKES
1. While standing still, make sure you can apply
full braking force without the brake lever
touching the handlebar. (If the lever touches,
your brakes may need adjustment.)
2. Check that the front wheel brake is working
properly. Ride the eBike at slow speed and
apply the front wheel brake. The eBike should
come to an immediate stop. Repeat the
process with the rear wheel brake.
WARNING:
Brake force applied to the front wheel
suddenly or too fully could lift the rear wheel off
the ground. This could decrease your control
and cause you to fall. For best results, apply both
brakes at the same time.
CHECK THE CHAIN
1. Make sure your chain has the correct tension
so that it can’t fall off. If you’re unsure of the
correct tension, see your bike shop.
2. Check that the chain has no kinks, rust, broken
pins, plates, or rollers.
CHECK THE CABLES
Make sure all cables and housings are properly
secured to the frame or fork so that they cannot
interfere with or get caught on moving parts.
CHECK REFLECTORS, LIGHTS, & ACCESSORIES
1. Make sure your reflectors, lights and any
other accessories are securely attached,
properly positioned, and working properly.
2. Position your lights parallel to the ground.
Make sure your batteries are charged.
CHECK YOUR BATTERY AND CONTROLLER
Check that your battery is locked in the dock and
fully charged, and your controller and eBike system
are functioning properly.
CHECK YOUR SUSPENSION
Adjust your suspension for your use, and make
sure that no suspension component can “bottom
out” or be fully compressed.
CHECK YOUR PEDALS
1. Make sure your pedals and shoes are clean and
free of debris that could affect your grip or
interfere with the pedal system.
2. Grab your pedals and crank arm and wiggle to
see if there’s any looseness. Also spin the
pedals to make sure they rotate freely.
Don’t forget to register your bike with us
to activate your product warranty
www.bakcou.com/product-registration
