background image

8

LITHIUM ION BATTERY

The battery typically has a partial charge straight from box. We recommend fully charging your battery 
prior to initial use. Your battery can be charged while on your bike, or it can be charged off your bike.

To charge the battery, remove the circular rubber plug from the 

LEFT

 side of your bike. Plug the charger 

into a power outlet and wait until the light on the charging unit is illuminated red. Plug the other end of 
the cord into the battery. The light will change to green once it’s fully charged. Allow approximately 4-8 
hours for a full charge (depending on battery size). Always charge in dry, ventilated conditions away from 
sunlight, ideally 50-80 degrees Fahrenheit.

To remove the battery from your bike, insert your key, turn it 90 degrees and pull the battery out.

During normal use, you can charge it after every ride regardless of battery level, there is no battery 
memory and therefore consistent charging won’t damage the battery. For safety, the charging unit will 
automatically stop charging once the battery is full. It’s never good to completely run the battery dead. 

The charger will get hot, so make sure to keep it away from all flammable materials and surfaces. Only use 
the original charger, DO NOT use any aftermarket chargers or charging accessories. 

For long term storage, it is best to leave the battery at about 50%-80% (2-3 lights) state of charge (SOC). 
Always store the battery in a cool place. For best results, do not store for longer than 4 months
without cycling the battery.

BATTERY LEVEL INDICATOR

BATTERY TO EBIKE CONNECTOR

POWER CHARGING PORT

Summary of Contents for STORM





























Reviews: