6
TIRE PRESSURE
Pump tires to desired pressure. The range for the tires is from 5 psi to 30 psi, with 5 psi being the lowest
the tire is rated for. Lower pressures can provide more traction, however increase the risk of pinch flats,
and decrease the range of the motor. Higher pressures can decrease the possibility of pinch flats, but
also can decrease grip on softer and varied terrain. We recommend using a 2 psi difference between the
front tire and rear tire (+2 psi in the rear tire) to maximize traction in the front and stability in the rear, for
example 15 psi front, 17 psi rear.
If you are riding in an area with a lot of thorns, we recommend puncture proof tire liners and/or a
tube/tire sealant.
POWERING THE UNIT ON
1. Make sure the battery is fully inserted and locked on your bike.
2. Get on the eBike, ready to ride.
3. Turn the battery on using the power switch on the
left side of the eBike.
4. Press and hold the power button on the keypad for
a couple seconds until the display turns on.
5. When the power comes on, the power level will be set to 1,
and therefore engaged for throttle or pedal assistance.
6. Use the + or - key on the keypad to change your pedal
assist power level from 0-5 (0 is no assistance,
5 is maximum assistance).
7. Press and hold (-) key for walk-assist mode.
8. Hold (+) key for 2 seconds for Sport Mode. This makes
the torque sensor more aggressive.
9. Hold (+) key again for Eco Mode. This will increase
battery efficiency.
10. To turn off, press and hold the power button again
for a couple seconds.
T I R E P R E S S U R E , P O W E R , B AT T E RY
for very soft sand
or snow
for most off-road riding,
depending on terrain
for pavement or hard,
smooth surfaces
5-15 PSI
15-25 PSI
25-30 PSI
POWER ON/OFF
(I) INFORMATION
PEDAL-ASSIST POWER DOWN
SCREEN BACKLIGHT LEVEL
PEDAL-ASSIST POWER UP
