manualshive.com logo in svg

BainUltra AMMA BALNEO, Owner'S Manual, Page: 12 / 63

Share
Download
BainUltra AMMA BALNEO Owner'S Manual Download Page 12

12  

 

Edge of bath 

Ceramic, marble, 

granit or other

Plywood

2” x 3” 

structure

1 

1/2

" 

[3.8 cm]

OWNER’S MANUAL

 | INSTALLATION INSTRUCTIONS

1 800 463.2187 

 

Monday to Thursday from 8 a.m. to 6 p.m.  (EST) . Friday from 8 a.m. to 5 p.m. (EST)  

Printed in Canada. Copyright © June 2020 BainUltra Inc. All rights reserved. 45200001

THERMOMASSEUR

®

 

PLUMBING INSTALLATION

IMPORTANT

  •  The ThermoMasseur must sit entirely on its base with the lip supported by a wooden structure.

 

• The ThermoMasseur must be level.

 

•  The ThermoMasseur is molded with an integrated slope towards the drain. If decking around the 

ThermoMasseur is level, the bath will drain accordingly. 

* See specification sheet of bath for exceptions.

1-1 

 Prepare the site to connect the  

plumbing and turbine.

1-2 

 Build the (2” x 3”) wooden structure 

taking into account the thickness of 

the ceramic tiles and the plywood as 

well as the height of the bath. 

NOTE: Plan air intake for turbine.

1-3 

 Secure plywood into place with screws 

around and above structure.

1-4 

 Cut inside 1 1/2” of the outside dimen-

sions of the tub.

1-5 

 Ensure bath is levelled and that it fits 

properly in cutout. 

NOTE: Protect turbine and accessories 

as you insert bath.

1-6 

 Install desired finishing materials on 

top and perimeter of tub box (ceramic-

tiles, granit, marble or other) .

1-7 

Set bath back into place and conduct  

 

plumbing and turbine connection.

NOTE

 

•  Baths with AromaCloud

®

 factory installed by BainUltra may require an additional cutout on  

the deck for the AromaCloud housing. This extra cutout is required when the housing  

is less than 1.5 inch from the edge of the bath.

1. DROP-IN INSTALLATION

Summary of Contents for AMMA BALNEO
































































Reviews:

No comments