I-E96-203C
vii
Safety Summary
GENERAL
WARNINGS
Equipment Environment
All components, whether in transportation, operation or storage,
must be in a noncorrosive environment.
Electrical Shock Hazard During Maintenance
Disconnect power or take precautions to insure that contact with
energized parts is avoided when servicing.
Special Handling
This module uses electrostatic sensitive devices.
SPECIFIC
WARNINGS
Disconnect power before installing dipshunts on the module
mounting unit backplane. Failure to do so will result in contact with
cabinet areas that could cause severe or fatal shock. (p. 3-10)
Wear eye protection whenever working with cleaning solvents.
When removing solvents from printed circuit boards using com-
pressed air, injury to the eyes could result from splashing solvent
as it is removed from the printed circuit board. (p. 6-1)
SPECIFIC
CAUTIONS
Never operate the MFP module with the machine fault timer circuit
disabled (jumper pins connected). Unpredictable module outputs
and configuration corruption may result. The unpredictable module
outputs may damage control equipment connected to the MFP
module. (p. 3-12)
To avoid potential module damage, evaluate your system for com-
patibility prior to module installation. This module uses connec-
tions to the module mounting unit backplane that served other
functions in early Network 90 systems. (p. 3-12)