INSTALLATION
INSTALLING THE TERMINATION UNIT
2 - 2
I-E96-418A
®
3. File a claim for any damage with the transportation com-
pany that handled the shipment.
4. Use the original packing material or container to store the
termination module.
5. Store the module in an environment of good air quality, free
from temperature and moisture extremes.
INSTALLING THE TERMINATION UNIT
The NTPL01 termination unit is ready to install. There are no
jumpers to set on the TPL.
Mounting The Termination Unit
To mount the termination unit:
1. Insert the tabs of the circuit board into the proper slots of
the termination panel standoff (see Figure
) and slide the
circuit board into position.
2. Secure the termination unit circuit board to the field termi-
nation panel with two - number ten machine screws (see Fig-
ure
).
Figure 2-1. Mounting and Securing the TPL to the NFTP01
CHASSIS COMMON
SCREW
TABS
STANDOFF
MOUNTING SCREWS
FIELD TERMINATION PANEL
T00592A
