INTRODUCTION
HARDWARE DESCRIPTION
1 - 2
I-E96-418A
®
HARDWARE DESCRIPTION
The TPL mounts on a Field Termination Panel (NFTP01), inside
the INFI 90
®
cabinet. It is a printed circuit board that consists
of:
•
Terminal strips.
•
Cable connectors.
•
Electronic components.
FEATURES
The NTPL01 provides connectors to terminate two Plant Loops.
The +24 VDC power can be supplied through system power or
an external supply. The TPL isolates the Plant Loop from the
electronics within a PCU and provides a place to connect cable
shielding.
INSTRUCTION CONTENT
This manual has five sections and one appendix.
Provides
an overview of the TPL.
Explains physical installation, wiring and cable requirements.
Contains a maintenance schedule.
Explains how to replace the termination unit.
Explains training, documentation and how to order parts from
Bailey Controls.
Discusses the INLIM03 and provides a cross-reference of
dipswitch and jumper settings for that unit.
HOW TO USE THIS MANUAL
Read this manual before installing the TPL. Do the installation
steps in order. Do not operate the TPL until you complete all
the steps in Section 2. Refer to the appendix for a quick refer-
ence guide to INLIM03 module dipswitch and jumper settings.
REFERENCE DOCUMENTS
® - INFI 90 is a registered trademark of Elsag Bailey Process Automation.
Document No.
Document
I-E96-500
Site Planning and Preparation
I-E96-506
Modular Power System
I-E96-508
DC Modular Power System
I-E96-605
Bus Interface Module/Loop Interface Module (INBIM02/INLIM03)
