Bailey Infi 90 IMQRC01, Instruction

Page: 12 / 48

INTRODUCTION
REFERENCE DOCUMENTS
I-E96-215A 1 - 3
REFERENCE DOCUMENTS
Table 1-2 lists the documents referenced in this instruction.
GLOSSARY OF TERMS AND ABBREVIATIONS
Table 1-3 lists definitions of the terms and abbreviations used
in this instruction.
Table 1-2. Referenced Documents
Document
Number
Document
I-E92-501-2 Configuration and Tuning Terminal Type CTT02 Manual
I-E93-900-20 Function Code Application Manual
I-E93-903 Configuration and Tuning Module (NCTM01) Manual
I-E93-903-2 Configuration Port Module (NCPM01) Manual
I-E96-409 Controller/Station Termination Module (NICS01) Manual
I-E96-442 Controller/Station Termination Unit (NTCS04) Manual
I-E96-423 Controller/Station Termination Unit (NTCS02) Manual
Table 1-3. Glossary of Terms and Abbreviations
Term Definition
Checksum A value computed from a data stream by treating each element as a number and
computing a sum of the elements.
Configuration The act of setting up equipment to accomplish specific functions or a list of parame-
ters associated with such a setup.
CPM Configuration Port Module. Communication link between the CTT and the module
bus.
CTM Configuration and Tuning Module. Provides a local means for system configuration,
tuning and monitoring of intelligent masters over module bus.
CTT Configuration and Tuning Terminal. A handheld module with the same functionality
as the configuration and tuning module.
Dipshunt A dual in-line package with shorting straps.
Dipswitch
A dual in-line package that contains switches.
EWS Abbreviation for Engineering Work Station.
Fatal Error
An unexpected failure or error that prevents the module from executing the
configuration.