Bailey Infi 90 IMQRC01, Instruction

Page: 11 / 48

INTRODUCTION
HOW TO USE THIS MANUAL
1 - 2 I-E96-215A
®
Operating Procedures
Explains the front panel indicator and start-up of the QRC
module.
Troubleshooting
Describes the error indications and corrective actions to take.
Maintenance
Contains a maintenance schedule for QRC modules.
Repair/Replacement
Procedures
Details the procedure to replace a QRC.
Support Services Provides replacement part ordering information. It explains
other areas of support that Bailey Controls provides.
Appendix A, B and C Contain specific information necessary to connect a QRC to
NTCS02/04 and NICS01 termination devices.
HOW TO USE THIS MANUAL
Read this manual through in sequence. It is important to
become familiar with the entire contents of this manual before
using the QRC. The manual is organized in sections to enable
quick and easy access to specific information.
1. Read and do the steps in Section 3 .
2. Refer to Section 4 to evaluate operating indications.
3. Refer to Section 5 if a problem occurs.
4. Refer to Section 6 for scheduled maintenance
requirements.
5. Use Section 8 when ordering replacement parts.
NOMENCLATURE
Table 1-1 is a list of related hardware.
Table 1-1. Nomenclature
Nomenclature Hardware
IMQRC01 Quick Response Controller Module
NICS01 Controller/Station Termination Module
NKTM01
NKTU01
NKTU02 Cable from NICS01 to IMQRC01
Cable from NTCS02/04 to IMQRC01
Cable from NICS01 to IMQRC01
NTCS02
NTCS04 Digital and Analog I/O Termination Unit
Digital and Analog I/O Termination Unit