INSTALLATION
SETUP/PHYSICAL INSTALLATION
I-E96-215A
3 - 7
4. Push and turn the two captive retaining screws on the
module faceplate one half turn to the latched position. It is
latched when the slots on the screws are vertical and the open
ends face the center of the module. (To remove the module,
turn the module retaining screws to the unlatched position
and slide it out).
Termination Unit
The termination unit/module is the interface between process
I/O and the module. The termination units/modules used with
the QRC are the NTCS02, NTCS04 and NICS01.
