12
12
50”
Front of Table to Center of Blade
14.5" (368mm)
Front of Table to Blade, Maximum Cut 10" (255mm)
Fence Information Fence Size (L x W x H)
34.25" x 2.9375" x .59"
(870 x 75 x 15mm)
Miter Gauge
Information
Miter Gauge Slot Type
T-Slot
Miter Gauge Slot Type (W x H)
.75" x .375" (19 x 9.5mm)
Other Information
Dust Port Size
4" (102mm)
Dust Collection Minimum CFM
350
Noise
No Blade
70db @ 3ft
10” Blade 85db @ 3ft
INTENDED USE
Table saw and the workpiece guide equipment supplied with it are intended to be used
exclusively for the following purposes:
•
Laminated and unlaminated board materials (e.g. chipboard, core board, MDF board, ...)
•
Solid wood
•
Gypsum plasterboard, Cardboard, Veneer with a suitable clamping device.
•
Dimensionally stable plastics (thermoset plastics, thermoplastics). Sawing these materials
does not normally involve any risks in respect of dust, chips, and thermal degradation
products.
Tools:
The chosen saw blade must be suitable both for the specific work cycle and for the specific
material.
•
Only circular blades which are solid chrome vanadium (CV) or tungsten carbide tipped (TCT)
and have a diameter of 10” (255mm), arbor size 5/8” (16mm), as well as a maximum width of
13/16” (20mm) are allowed for the main saw.
•
Saw blades made of high-alloy high-speed steel (HSS) are not allowed to be used.
•
Saw blades and their fixing devices shall conform to EN 847-1:2005.
