Baileigh Industrial DP-1400VS, Operator'S Manual

Page: 21 / 48

18
18
ASSEMBLY AND SET UP
Down Feed Handles
1. Thread the down feed handles into the down feed
hub.
2. Tighten securely.
Table Elevation Crank Handle
1. Align the crank handle set screw to the flat
on the pinion shaft.
2. Slide the handle onto the shaft until the
shaft is flush with the outer surface of the
crank handle hub.
3. Tighten the set screw to secure the handle
to the shaft.
WARNING:
For your own safety, DO NOT connect the machine to the
power source until the machine is completely assembled and you read and
understand the entire instruction manual.
Flat